Guide bars and matching chains

STIHL MS 162

  1. 1Model
  2. 2Guide bar
  3. 3Chain

PNC: 11482000000. Check that the complete model name and product number (PNC) match the rating plate before choosing.

4 guide-bar alternatives shown.

Choose a guide-bar combination

Match the guide-bar make, product name, length and article number. Then open the matching chains for that guide bar.

Source statusReview in progress

STIHL

12 in · 3/8-mini″ · 1.1 mm

Light P01, 3/8", 1,1 mm, svärdsinfästning 3005

Article number
30050007605
drive links
44
View guide bar 30050007605
Show matching chains3 chain options
Source statusReview in progress

STIHL

14 in · 3/8-mini″ · 1.1 mm

Light P01, 3/8", 1,1 mm, svärdsinfästning 3005

Article number
30050007609
drive links
50
View guide bar 30050007609
Show matching chains3 chain options

Chains match pitch, gauge and drive-link count exactly. This alone does not prove saw-to-bar fitment.

How fitment is assessed

Guide bars come from the allowed list for a documented saw profile. “Review in progress” means source or exact article/variant checks remain.

Source status describes the review of the evidence. It is separate from dimensional matching and does not confirm what is fitted to your saw.

How to check the chain dimensions →
Documented combinations by product number

Reference overview for all listed variants. This does not identify the equipment fitted to your saw.

Which examples and sources are covered?

This page covers STIHL MS 162 and the product numbers listed below. Other generations and market variants may use different equipment.

Product numbers in the catalogue: 11482000000. Factory equipment does not prove what is fitted to your saw today.

See source references

Documented cutting systems and changes

The scope below distinguishes model-level alternatives from equipment documented for a specific product number.

Carving, 1/4 Rapid, model-level alternative · 1/4″ · 1.3 mm

Model-level alternative; exact PNC applicability remains unconfirmed.

Chain families: RMS. Drive sprocket: type not documented / —.

This alternative requires the documented changes below.

  • Change to a 1/4 Rapid chain sprocket and clutch drum. The German model matrix specifies conversion kit 1148 007 1002.

This research record does not add a guide bar or chain option to the selected product number.

  • Official evidence is needed for kit 1148 007 1002 on exact Swedish PNC 11482000000, the drive-sprocket construction/tooth count, and article 3005 000 3205’s nose radius and applicable radius limit. The model matrix names MS 162, not the Swedish PNC; no carving profile is published.
Sources and scope
  • stihl-ms162-manual-20261002: 0458-200-8321-A, printed/PDF p.29, MS 162: separate carving row, 30 cm, 1/4-inch, 1.3 mm, 64 drive links, RMS. The standard 3/8 P rows’ six drive-sprocket teeth are not transferred to the 1/4-inch system.
  • stihl-catalogue-2025-expansion: Printed p.100/PDF p.51, visually reviewed on 2026-10-10: MS 162/MS 172/MS 182/MS 212, 1/4-inch carving, chain 3661 000 0064 and guide bar 3005 000 3205. Footnote 1 requires conversion to a 1/4 Rapid sprocket and clutch drum, kit 1148 007 1002. Model scope, not PNC approval.