Guide bars and matching chains

Husqvarna 555

  1. 1Model
  2. 2Guide bar
  3. 3Chain

PNC: 966 01 09-15. Check that the complete model name and product number (PNC) match the rating plate before choosing.

5 guide-bar alternatives shown.

Choose a guide-bar combination

Match the guide-bar make, product name, length and article number. Then open the matching chains for that guide bar.

Source statusReview in progress

Husqvarna

13 in · .325″ · 1.5 mm

Svärd .325", X-Force

Article number
582 08 69-56
drive links
56
View guide bar 582 08 69-56
Show matching chains6 chain options
Source statusReview in progress

Husqvarna

15 in · .325″ · 1.5 mm

Svärd .325", X-Force

Article number
582 08 69-64
drive links
64
View guide bar 582 08 69-64
Show matching chains6 chain options
Source statusReview in progress

Husqvarna

16 in · .325″ · 1.5 mm

Svärd .325", X-Force

Article number
582 08 69-66
drive links
66
View guide bar 582 08 69-66
Show matching chains5 chain options
Source statusReview in progress

Husqvarna

18 in · .325″ · 1.5 mm

Svärd .325", X-Force

Article number
582 08 69-72
drive links
72
View guide bar 582 08 69-72
Show matching chains5 chain options

Chains match pitch, gauge and drive-link count exactly. This alone does not prove saw-to-bar fitment.

How fitment is assessed

Guide bars come from the allowed list for a documented saw profile. “Review in progress” means source or exact article/variant checks remain.

Source status describes the review of the evidence. It is separate from dimensional matching and does not confirm what is fitted to your saw.

How to check the chain dimensions →
Documented combinations by product number

Reference overview for all listed variants. This does not identify the equipment fitted to your saw.

Which examples and sources are covered?

This page covers Husqvarna 555 and the product numbers listed below. Other generations and market variants may use different equipment.

Product numbers in the catalogue: 966 01 09-15. Factory equipment does not prove what is fitted to your saw today.

See source references

Documented cutting systems and changes

The scope below distinguishes model-level alternatives from equipment documented for a specific product number.

H25, nose limits from the 555 manual · .325″ · 1.5 mm

Model-level alternative; exact PNC applicability remains unconfirmed.

Chain families: H25. Drive sprocket: rim / 7.

Conversion requirements for the selected PNC remain unknown.

  • 13 in: 10T
  • 15 in: 12T
  • 16 in: 12T
  • 18 in: 12T
  • 20 in: 12T

This research record does not add a guide bar or chain option to the selected product number.

  • Swedish PNC 966 01 09-15 still needs its own revision, installed/alternative system and exact article checks. The model’s H25 limits are not actual nose dimensions for the 582 08 69 articles. Limits from the 545/550 Mark II are not transferred.
Sources and scope
  • legacy-husqvarna-555-manual-20261003: 587-009, Swedish p.35: the named 555, rim/7 and H25 .325/1.5 mm, 13/56, 15/64, 16/66, 18/72, 20/80. The 13-inch row allows a maximum of 10 teeth; the 15–20-inch rows explicitly list 11 or 12 teeth, stored here as a maximum of 12. The model table does not identify a PNC.
S35G/C35, family-specific nose limits for the 555 · .325″ · 1.5 mm

Model-level alternative; exact PNC applicability remains unconfirmed.

Chain families: S35G, C35. Drive sprocket: rim / 7.

Conversion requirements for the selected PNC remain unknown.

  • 13 in: 11T
  • 15 in: 11T
  • 16 in: 12T
  • 18 in: 34 mm
  • 20 in: 34 mm

This research record does not add a guide bar or chain option to the selected product number.

  • PNC, conversion and article evidence specific to the 555 remains outstanding. The current C35 table has no drive-link count for 13 inches; 56 must not be copied from S35G/H25. Shared nose limits do not imply the same kickback-reduction classification.
Sources and scope
  • legacy-husqvarna-555-manual-20261003: 587-009, pp.35–36: rim/7; separate S35G and C35 blocks, .325/1.5 mm. Both specify 11 teeth at 13/15 inches, 12 at 16 inches and 34 mm at 18/20 inches. C35 has no drive-link count at 13 inches; this system record creates no drive-link row or profile. S35G has a separate kickback-reduction column, which is not transferred to C35.
C33, model-level alternative for the 555 · .325″ · 1.3 mm

Model-level alternative; exact PNC applicability remains unconfirmed.

Chain families: C33. Drive sprocket: rim / 7.

Conversion requirements for the selected PNC remain unknown.

  • 13 in: 11T
  • 15 in: 11T
  • 16 in: 12T
  • 18 in: 34 mm
  • 20 in: 34 mm

This research record does not add a guide bar or chain option to the selected product number.

  • C33/1.3 mm needs exact Swedish PNC, conversion and article evidence. The 13-inch row has a nose limit but no drive-link count in this manual; no profile may be inferred from H25 or C35.
Sources and scope
  • legacy-husqvarna-555-manual-20261003: 587-009, pp.35–36: rim/7; separate C33 .325/1.3 mm block with 15/64, 16/66, 18/72, 20/80 and a 13-inch row without a drive-link count. Sprocket-nose limits: 11 teeth at 13/15 inches and 12 at 16 inches; solid-nose limit: 34 mm at 18/20 inches. This record documents those limits, not an assumed drive-link count.
H42, 3/8-inch with a documented rim-sprocket change · 3/8″ · 1.5 mm

Model-level alternative; exact PNC applicability remains unconfirmed.

Chain families: H42. Drive sprocket: rim / 7.

This alternative requires the documented changes below.

  • Change to a 3/8-inch rim sprocket when converting from .325. The model manual requires different rim sprockets for these pitches.
  • 13 in: 11T
  • 15 in: 11T
  • 16 in: 11T
  • 18 in: 11T
  • 20 in: 11T
  • 24 in: 11T

This research record does not add a guide bar or chain option to the selected product number.

  • The documented model-level conversion needs its own approval and component evidence for Swedish PNC 966 01 09-15. The installed system, exact 3/8-inch guide-bar articles and their nose dimensions remain unconfirmed; no 3/8-inch profiles are published.
Sources and scope
  • legacy-husqvarna-555-manual-20261003: 587-009, p.35: named model 555, rim/7; H42 3/8-inch/1.5 mm, 13/52, 15/56, 16/60, 18/68, 20/72, 24/84, maximum 11 teeth. An explicit note requires different rim sprockets for .325 and 3/8-inch. H42’s 13-inch row does not appear in the C85/S85 block.
C85/S85, separate 3/8-inch alternative · 3/8″ · 1.5 mm

Model-level alternative; exact PNC applicability remains unconfirmed.

Chain families: C85, S85. Drive sprocket: rim / 7.

This alternative requires the documented changes below.

  • Change to a 3/8-inch rim sprocket when converting from .325. The model manual requires different rim sprockets for these pitches.
  • 15 in: 11T
  • 16 in: 11T
  • 18 in: 11T
  • 20 in: 11T
  • 24 in: 11T

This research record does not add a guide bar or chain option to the selected product number.

  • Exact Swedish PNC, rim-sprocket conversion and article evidence remains outstanding. The C85/S85 block starts at 15 inches; H42’s 13-inch row is not transferred. This is model-level documentation, not verified equipment installed for a PNC.
Sources and scope
  • legacy-husqvarna-555-manual-20261003: 587-009, pp.35–36: rim/7 and an explicit .325/3/8-inch rim-sprocket change. Separate C85/S85 3/8-inch/1.5 mm block: 15/56, 16/60, 18/68, 20/72, 24/84, maximum 11 teeth. No 13-inch row appears in this block and no 34 mm limit is transferred from S35G/C33/C35.