Guide bars and matching chains

Husqvarna 550i XP G

  1. 1Model
  2. 2Guide bar
  3. 3Chain

PNC: 970 74 60-15. Check that the complete model name and product number (PNC) match the rating plate before choosing.

5 guide-bar alternatives shown.

Choose a guide-bar combination

Match the guide-bar make, product name, length and article number. Then open the matching chains for that guide bar.

Source statusReview in progress

Husqvarna

13 in · .325″ · 1.3 mm

Svärd .325" Pixel, X-Force

Article number
582 07 53-56
drive links
56
View guide bar 582 07 53-56
Show matching chains6 chain options
Source statusReview in progress

Husqvarna

15 in · .325″ · 1.3 mm

Svärd .325" Pixel, X-Force

Article number
582 07 53-64
drive links
64
View guide bar 582 07 53-64
Show matching chains5 chain options
Source statusReview in progress

Husqvarna

16 in · .325″ · 1.3 mm

Svärd .325" Pixel, X-Force

Article number
582 07 53-66
drive links
66
View guide bar 582 07 53-66
Show matching chains4 chain options
Source statusReview in progress

Husqvarna

18 in · .325″ · 1.3 mm

Svärd .325" Pixel, X-Force

Article number
582 07 53-72
drive links
72
View guide bar 582 07 53-72
Show matching chains4 chain options

Chains match pitch, gauge and drive-link count exactly. This alone does not prove saw-to-bar fitment.

How fitment is assessed

Guide bars come from the allowed list for a documented saw profile. “Review in progress” means source or exact article/variant checks remain.

Source status describes the review of the evidence. It is separate from dimensional matching and does not confirm what is fitted to your saw.

How to check the chain dimensions →
Documented combinations by product number

Reference overview for all listed variants. This does not identify the equipment fitted to your saw.

Which examples and sources are covered?

This page covers Husqvarna 550i XP G and the product numbers listed below. Other generations and market variants may use different equipment.

Product numbers in the catalogue: 970 74 60-15. Factory equipment does not prove what is fitted to your saw today.

See source references

Documented cutting systems and changes

The scope below distinguishes model-level alternatives from equipment documented for a specific product number.

C33, standard chain in the model manual (installed PNC system unconfirmed) · .325″ · 1.3 mm

Model-level alternative; exact PNC applicability remains unconfirmed.

Chain families: C33. Drive sprocket: type not documented / 7.

Conversion requirements for the selected PNC remain unknown.

  • 13 in: 11T
  • 15 in: 11T
  • 16 in: 11T
  • 18 in: 11T
  • 20 in: 11T

This research record does not add a guide bar or chain option to the selected product number.

  • The model manual’s standard C33 chain does not identify installed equipment for each Swedish PNC. SM7 construction, exact PNC/article relations and conversion requirements remain unconfirmed. The 550i’s 11-tooth limits at 18/20 inches must not be replaced with the petrol Mark II group’s 34 mm limit.
  • Exact system applicability for husqvarna-husqvarna-550i-xp-g, product numbers 970 74 60-15, needs its own evidence.
Sources and scope
  • husqvarna-manual-550i-xp-g-2025-09: 2469-002, Swedish pp.39–40, visually reviewed: 550i XP/G, SM7 .325/7 and a separate C33 standard-chain block, .325/1.3 mm, 13/15/16/18/20 inches, maximum 11 teeth in all five rows. SM7 is named but is not interpreted as rim or spur construction.
SP33G, option in the model manual · .325″ · 1.3 mm

Model-level alternative; exact PNC applicability remains unconfirmed.

Chain families: SP33G. Drive sprocket: type not documented / 7.

Conversion requirements for the selected PNC remain unknown.

  • 13 in: 11T
  • 15 in: 11T
  • 16 in: 11T
  • 18 in: 11T
  • 20 in: 11T

This research record does not add a guide bar or chain option to the selected product number.

  • The SP33G option’s exact Swedish PNC, SM7 construction, article relations and any conversion requirements remain unconfirmed. No profile is linked to this model record.
  • Exact system applicability for husqvarna-husqvarna-550i-xp-g, product numbers 970 74 60-15, needs its own evidence.
Sources and scope
  • husqvarna-manual-550i-xp-g-2025-09: 2469-002, pp.39–40, 550i XP/G: SM7 .325/7; separate SP33G option, .325/1.3 mm, 13/15/16/18/20 inches, maximum 11 teeth. The table identifies no PNC or guide-bar article.
C35, option in the model manual · .325″ · 1.5 mm

Model-level alternative; exact PNC applicability remains unconfirmed.

Chain families: C35. Drive sprocket: type not documented / 7.

Conversion requirements for the selected PNC remain unknown.

  • 13 in: 11T
  • 15 in: 11T
  • 16 in: 11T
  • 18 in: 11T
  • 20 in: 11T

This research record does not add a guide bar or chain option to the selected product number.

  • C35/1.5 mm needs its own Swedish PNC, SM7, conversion and article evidence. The 550i manual specifies 11 teeth at 18/20 inches too; C35 limits from other model families are not transferred.
  • Exact system applicability for husqvarna-husqvarna-550i-xp-g, product numbers 970 74 60-15, needs its own evidence.
Sources and scope
  • husqvarna-manual-550i-xp-g-2025-09: 2469-002, pp.39–40, 550i XP/G: SM7 .325/7; separate C35 option, .325/1.5 mm, 13/15/16/18/20 inches, maximum 11 teeth. C35’s kickback-reduction column says No and is not transferred to S35G.
S35G, option in the model manual · .325″ · 1.5 mm

Model-level alternative; exact PNC applicability remains unconfirmed.

Chain families: S35G. Drive sprocket: type not documented / 7.

Conversion requirements for the selected PNC remain unknown.

  • 13 in: 11T
  • 15 in: 11T
  • 16 in: 11T
  • 18 in: 11T
  • 20 in: 11T

This research record does not add a guide bar or chain option to the selected product number.

  • S35G/1.5 mm needs its own Swedish PNC, SM7, conversion and article evidence. The model’s 11-tooth limit at every length must not be confused with the family-specific limits for the petrol 545/550 Mark II.
  • Exact system applicability for husqvarna-husqvarna-550i-xp-g, product numbers 970 74 60-15, needs its own evidence.
Sources and scope
  • husqvarna-manual-550i-xp-g-2025-09: 2469-002, pp.39–40, 550i XP/G: SM7 .325/7; separate S35G option, .325/1.5 mm, 13/15/16/18/20 inches, maximum 11 teeth. S35G’s kickback-reduction column says No in this source; classifications from other model groups are not transferred.