Conversion requirements for the selected PNC remain unknown.
13 in: 11T
15 in: 11T
16 in: 11T
18 in: 11T
20 in: 11T
This research record does not add a guide bar or chain option to the selected product number.
The model manual documents SP33G and rim/7, but installed versus alternative systems for the selected Swedish PNC and exact article relations remain unconfirmed. This system record is not linked to profiles automatically.
Exact system applicability for husqvarna-husqvarna-545g-mark-ii, product numbers 967 69 07-33, needs its own evidence.
Sources and scope
husqvarna-manual-545-550-mark-ii-2024-11-sv: 544-013, printed/PDF pp.150–151, visually reviewed: both 545 Mark II and 545G Mark II are named; rim/7 and a shared SP33G table, .325/1.3 mm, 13/15/16/18/20 inches, maximum 11 teeth in all five rows. Approved model equipment, without PNC or guide-bar article numbers.
H25, alternative in the model manual · .325″ · 1.5 mm
Conversion requirements for the selected PNC remain unknown.
13 in: 11T
15 in: 11T
16 in: 12T
18 in: 12T
20 in: 12T
This research record does not add a guide bar or chain option to the selected product number.
The H25 alternative needs its own system/article evidence for the selected Swedish PNC. The manual’s 11 or 12 teeth at 16/18/20 inches must not be replaced with S35G’s 34 mm limit.
Exact system applicability for husqvarna-husqvarna-545g-mark-ii, product numbers 967 69 07-33, needs its own evidence.
Sources and scope
husqvarna-manual-545-550-mark-ii-2024-11-sv: 544-013, pp.150–151: 545/545G Mark II, rim/7; shared H25 block, .325/1.5 mm. Maximum 11 teeth at 13/15 inches; explicitly 11 or 12 teeth at 16/18/20 inches. The field stores the highest permitted tooth count, with no conversion to a radius.
S35G/C35, family-specific nose limits · .325″ · 1.5 mm
Chain families: S35G, C35. Drive sprocket: rim / 7.
Conversion requirements for the selected PNC remain unknown.
13 in: 11T
15 in: 11T
16 in: 12T
18 in: 34 mm
20 in: 34 mm
This research record does not add a guide bar or chain option to the selected product number.
Evidence is needed for the installed/alternative 1.5 mm system, conversion requirements and article relations for the selected Swedish PNC, and the guide bars’ nose dimensions. S35G/C35 share these dimensional limits but have different kickback-reduction classifications; a dimensionally matching loop does not inherit a recommendation.
Exact system applicability for husqvarna-husqvarna-545g-mark-ii, product numbers 967 69 07-33, needs its own evidence.
Sources and scope
husqvarna-manual-545-550-mark-ii-2024-11-sv: 544-013, pp.150–151, named 545/545G Mark II: rim/7. Separate S35G and C35 blocks, both .325/1.5 mm, 11 teeth at 13/15 inches, 12 at 16 inches and 34 mm at 18/20 inches. Kickback reduction: S35G Yes; C35 No. The grouping applies only to shared cutting-system dimensions/nose limits.
C33, alternative in the model manual · .325″ · 1.3 mm
Conversion requirements for the selected PNC remain unknown.
13 in: 11T
15 in: 11T
16 in: 12T
18 in: 34 mm
20 in: 34 mm
This research record does not add a guide bar or chain option to the selected product number.
C33 system article relations and any conversion requirements need evidence for the selected Swedish PNC. Matching .325/1.3 mm dimensions do not justify inheriting SP33G’s 11-tooth limit or recommendation.
Exact system applicability for husqvarna-husqvarna-545g-mark-ii, product numbers 967 69 07-33, needs its own evidence.
Sources and scope
husqvarna-manual-545-550-mark-ii-2024-11-sv: 544-013, pp.150–151, named 545/545G Mark II: rim/7; C33 .325/1.3 mm, 11 teeth at 13/15 inches, 12 at 16 inches and 34 mm at 18/20 inches. Separate family block; kickback reduction No.