Guide bars and matching chains

Husqvarna 440i

  1. 1Model
  2. 2Guide bar
  3. 3Chain

PNC: 970 83 86-13. Check that the complete model name and product number (PNC) match the rating plate before choosing.

2 guide-bar alternatives shown.

Choose a guide-bar combination

Match the guide-bar make, product name, length and article number. Then open the matching chains for that guide bar.

Chains match pitch, gauge and drive-link count exactly. This alone does not prove saw-to-bar fitment.

How fitment is assessed

Guide bars come from the allowed list for a documented saw profile. “Review in progress” means source or exact article/variant checks remain.

Source status describes the review of the evidence. It is separate from dimensional matching and does not confirm what is fitted to your saw.

How to check the chain dimensions →
Documented combinations by product number

Reference overview for all listed variants. This does not identify the equipment fitted to your saw.

Which examples and sources are covered?

This page covers Husqvarna 440i and the product numbers listed below. Other generations and market variants may use different equipment.

Product numbers in the catalogue: 970 83 86-13. Factory equipment does not prove what is fitted to your saw today.

See source references

Documented cutting systems and changes

The scope below distinguishes model-level alternatives from equipment documented for a specific product number.

SP33G, current 440i model manual · .325″ · 1.3 mm

Model-level alternative; exact PNC applicability remains unconfirmed.

Chain families: SP33G. Drive sprocket: spur / 7.

Conversion requirements for the selected PNC remain unknown.

  • 13 in: 11T
  • 15 in: 11T

This research record does not add a guide bar or chain option to the selected product number.

  • The model’s spur/7 drive and SP33G table are documented; this record does not identify the equipment fitted to the user’s saw. Full PNC-specific system evidence and exact article/nose evidence remain outstanding. The current combination table has no 16, 18 or 20-inch row.
Sources and scope
  • husqvarna-manual-440i-2026-06-sv: 2641-001, Swedish p.637: spur/7 and the named 440i table, .325/1.3 mm/SP33G, 13/56 and 15/64, maximum 11 teeth. This is a model record, not automatic profile/article approval or a statement about installed equipment.