Guide bars and matching chains

Husqvarna 120 Mark II

  1. 1Model
  2. 2Guide bar
  3. 3Chain

PNC: 967 86 19-03. Check that the complete model name and product number (PNC) match the rating plate before choosing.

5 guide-bar alternatives shown.

Choose a guide-bar combination

Match the guide-bar make, product name, length and article number. Then open the matching chains for that guide bar.

Source statusReview in progress

Husqvarna

14 in · 3/8-mini″ · 1.3 mm

Svärd 3/8" MINI

Article number
501 95 92-52
drive links
52
View guide bar 501 95 92-52
Show matching chains6 chain options
Source statusReview in progress

Husqvarna

14 in · 3/8-mini″ · 1.3 mm

Svärd 3/8" MINI, X-Force

Article number
582 20 76-52
drive links
52
View guide bar 582 20 76-52
Show matching chains6 chain options
Source statusReview in progress

Husqvarna

16 in · 3/8-mini″ · 1.3 mm

Svärd 3/8" MINI

Article number
501 95 92-56
drive links
56
View guide bar 501 95 92-56
Show matching chains8 chain options
Source statusReview in progress

Husqvarna

16 in · 3/8-mini″ · 1.3 mm

Svärd 3/8" MINI, X-Force

Article number
582 20 76-56
drive links
56
View guide bar 582 20 76-56
Show matching chains8 chain options
Source statusReview in progress

Husqvarna

18 in · 3/8-mini″ · 1.3 mm

Svärd 3/8" MINI

Article number
501 95 92-62
drive links
62
View guide bar 501 95 92-62
Show matching chains7 chain options

Chains match pitch, gauge and drive-link count exactly. This alone does not prove saw-to-bar fitment.

How fitment is assessed

Guide bars come from the allowed list for a documented saw profile. “Review in progress” means source or exact article/variant checks remain.

Source status describes the review of the evidence. It is separate from dimensional matching and does not confirm what is fitted to your saw.

How to check the chain dimensions →
Documented combinations by product number

Reference overview for all listed variants. This does not identify the equipment fitted to your saw.

Detailed combination documentation

Start with the guide bar article number

Read the markings on the guide bar. The complete number is required — length alone is not enough.

I do not know / cannot find the article number

Switch off the saw before examining the markings. Look for a complete article number and dimensions near the guide-bar mount.

Only have length, pitch, gauge and drive-link count? Search using the dimensions you can read. This identifies candidates but does not prove that the guide bar fits the saw.

If the markings are missing, take the model designation, serial number and any markings you can find to a dealer for identification. See the guide’s sources and limitations.

1 guide-bar combinations

Compare with your existing equipment

You can read the information even if you do not know. Opening a row does not confirm what is fitted to your saw.

Which examples and sources are covered?

This page covers Husqvarna 120 Mark II and the product numbers listed below. Other generations and market variants may use different equipment.

Product numbers in the catalogue: 967 86 19-03. Factory equipment does not prove what is fitted to your saw today.

See source references